LANGUAGE:


Shaft alignment

D525

A professional system for all types of measurement

This is our most flexible shaft system, with all programs and functions for the alignment of rotating machines included in system D505, as well as all programs for geometric measurements. You only need add the geometric accessories you need. This system is common as a base for professional maintenance companies that must be able to solve all types of measurements and alignments. If you mainly carry out shaft alignment, but wish to perform geometric measurements now or in the future, this is also the right system for you. For example, you can check straightness and twist on the machine base, and perform vibration measurements* and digital sheave/pulley alignment*.

 

Typical applications for this system are horizontally, vertically/flange mounted and cardan-shaft-coupled machines*, machine trains (up to ten machines in line) as well as BTA Digital and geometric measurements when suitable measuring accessories from these systems are used.

* Requires accessory

 

 

System D525 B

This is a version of the system with a 2-axis measuring unit instead. For geometric applications it gives the possibility of measuring both X and Y axes at the same time. Ask your Easy-Laser® representative about which system suits your needs. 
 
RELATED INFORMATION

 
System D525

A COMPLETE SYSTEM CONTAINS:

  • 1 Display unit D279 (27 programs)
  • 2 Measuring units (S, M)
  • 12 Rods for measuring units (8x120 mm, 4x60 mm)
  • 2 Shaft brackets with chains
  • 2 Extension chains
  • 2 Offset brackets 
  • 2 Magnet bases
  • 2 Cables with Push/Pull connectors (2x2 m)
  • 1 Manual
  • 1 Measuring tape
  • 1 Protective case for display unit
  • 1 EasyLink™ Windows® program and PC cable
  • 1 Carrying case
2-axis measurement unit

With 1 axis measurement unit (1) a transfer of the measuring unit between position A and B can be read off in one direction. With 2-axis measurement unit (2) two directions can be read off at the same time. This is a great advantage for many types of measurement. The theoretical resolution on the detector is 1 millionth.

CHARACTERISTICS AND FUNCTIONS:

  • 14 programs for all types of rotating machines
  • 13 programs for geometric applications
  • EasyTurn™ function
  • Thermal growth compensation
  • Tolerance check
  • Extremely long operating time (up to 48 hours)
  • Documentation possibilities
  • Expandable
  • 2 year warranty