FOR DOCUMENTATION
|
 |
Battery powered thermal printer |
With cable and 220V or 110V charger.
For connection to all systems with display unit D279. (Printer included as standard in systems D650 and D660.) |
|
 |
EasyLink™ software |
Database and documentation software for Windows®. Included in all systems with display unit D279. |
|
FOR VIBRATION MEASUREMENT
|
 |
Vibrometer probe D283 |
For measuring vibration levels (mm/s) and bearing condition (g-value). For systems with “Vibrometer” software in display unit D279. |
|
FOR SHAFT ALIGNMENT
|
 |
Sliding bracket |
Used when the shafts cannot be rotated. |
 |
 |
Thin shaft bracket |
Used, for example, when there is limited space between the coupling and machine. |
 |
 |
Magnetic bracket |
For axial mounting on flanges or shafts. |
 |
 |
Cardan bracket kit |
For alignment of flange/offset mounted machines. |
|
 |
Magnet base |
For direct attachment to shaft or flange. (Included in system D505/D525) |
 |
 |
Offset bracket |
Allows axial displacement of the measuring units. (Included in system D505/D525) |
 |
FOR SHEAVE/PULLEY ALIGNMENT
|
 |
D160 BTA digital |
For aligning sheaves/pulleys. The Easy-Laser® D160 detector unit can be connected to our standard display unit D279*, which is included in shaft alignment systems D505 and D525, for example. The pulleys’ mutual parallelism is shown graphically and digitally with adjustment and shim values for the machine’s foot pair. This unit also allows you to save, print out and transfer the measurement results to a PC, in the same way as for normal shaft alignment.
*Does not apply to system D450, which does not have the required software for sheave/pulley alignment.
NB! Requires software version 1.06 or later for display unit D279. |
|
FOR GEOMETRIC MEASUREMENTS
|
 |
Swivelling laser D22 |
With rotating head. For measuring flatness, straightness, squareness, parallelism and spindle direction. The laser beam can sweep 360° with a measurement distance of 40 metres in radius. The beam can be deflected at 90° to the sweep, within 0.01 mm/m. |
|
 |
Spin laser D23 |
With power rotating head providing a 360° laser plane. Used together with detector D6. For quick and easy measurement of flatness and plane-parallelism etc. |
|
 |
Laser transmitter D75 |
For measuring straightness and spindle direction. M6 threads on ends and sides offer alternative mounting options. Measurement distance - 40 metres. Also available in versions with measurement distance of 60 metres (D75 Long-range). |
|
 |
Laser transmitter D75 Truebeam |
For measuring straightness and spindle direction. M6 threads on ends and sides offer alternative mounting options. Measurement distance - 80 metres. Not standard product. |
|
 |
Spindle laser D146 |
For measuring spindle direction and straightness. Can be used in a rotating spindle (max. 2000rpm). Mounting pins with different diameters can be used. The mounting pin can be fitted at either end, for use when aligning rod cartridges, for example. Measurement distance - 20 metres. |
|
 |
Detector D5 |
Reads off the position of the laser beam in two directions (2 axis PSD). With 360° inclinometers. A number of mounting holes and threads make alternative attachment possible. Two alternative connectors for connection to display unit and other detectors (serial connection possible) |
|
 |
Detector D6 |
Reads off the position of the laser beam in one direction (1 axis PSD). A number of mounting holes and threads make alternative attachment possible. Two alternative connectors for connection to display unit and other detectors (serial connection possible) Only for use together with laser transmitter D23. |
|
 |
Detector D157 |
Reads off the position of the laser beam in two directions (2 axis PSD). With 360° incliniometers. A number of mounting holes and threads make alternative attachment possible. Two alternative connectors for connection to display unit and other detectors (serial connection possible) Diameter 40 mm, length 60 mm. |
|
 |
Measuring unit D116 (M) |
Laser LED and detector in one housing. Reads off the position of the laser beam from another transmitter unit in two directions (2 axis PSD). With 360° incliniometers. A number of mounting holes and threads make alternative attachment possible. Two alternative connectors for connection to display unit and other detectors (serial connection possible) |
|
 |
Angular prism D46 |
For use when measuring squareness and parallelism. A penta prism that deflects the beam 90° is integrated in an adjustable housing. |
|
 |
Fixture for D75 |
With three magnets. For mounting against shaft ends, flywheels etc. |
|
 |
Magnet base with turnable head |
For use together with detectors, measurement units and laser transmitters where the unit needs to be rotated on fixed magnetic foot. |
|
 |
Sliding bracket |
Available in various versions, with and without magnets, measurement probe and revolving top section, depending on measurement application. |
|
 |
Tripod |
For laser transmitter D22 and angular prism D46. Height 500-2730 mm. |
|
 |
Parallelism kit |
For use together with D22, D46 and two stands (detector D5 or 2-axis measurement unit D116 also required). |
|
See more accessories in the pdf brochure.
Download brochure (pdf) |
